Corrosion Related ISO Standards

ISO 196:1978 – Wrought copper and copper alloys — Detection of residual stress — Mercury(I) nitrate test

ISO 1459:1973 – Metallic coatings — Protection against corrosion by hot dip galvanizing — Guiding principles

ISO 1462:1973 – Metallic coatings — Coatings other than those anodic to the basis metal — Accelerated corrosion tests Method for the evaluation of the results

ISO 1562:1993 – Dental casting gold alloys

ISO 2160:1998 – Petroleum products — Corrosiveness to copper — Copper strip test

ISO 3160-2:1992 – Watch cases and accessories — Gold alloy coverings — Part 2: Determination of fineness, thickness, corrosion resistance and adhesion

ISO 3506-1:1997 – Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 1: Bolts, screws and studs

ISO 3506-2:1997 – Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 2: Nuts

ISO 3506-3:1997 – Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress

ISO 3651-1:1998 – Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)

ISO 3651-2:1998 – Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid

ISO 4404:1998 – Petroleum and related products — Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems

ISO 4520:1981 – Chromate conversion coatings on electroplated zinc and cadmium coatings

ISO 4524-2:1985 – Metallic coatings — Test methods for electrodeposited gold and gold alloy coatings — Part 2: Environmental tests

ISO/DIS 4524-2 – Metallic coatings — Test methods for electrodeposited gold and gold alloy coatings — Part 2: Mixed flowing gas (MFG) environmental tests

ISO 4536:1985 – Metallic and non-organic coatings on metallic substrates — Saline droplets corrosion test (SD test)

ISO 4538:1978 – Metallic coatings — Thioacetamide corrosion test (TAA test)

ISO 4539:1980 – Electrodeposited chromium coatings — Electrolytic corrosion testing (EC test)

ISO 4540:1980 – Metallic coatings — Coatings cathodic to the substrate — Rating of electroplated test specimens subjected to corrosion tests

ISO 4541:1978 – Metallic and other non-organic coatings — Corrodkote corrosion test (CORR test)

ISO 4543:1981 – Metallic and other non-organic coatings — General rules for corrosion tests applicable for storage conditions

ISO 4623:1984 – Paints and varnishes — Filiform corrosion test on steel

ISO/DIS 4623-1 – Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: On steel (Revision, in parts, of ISO 4623:1984)

ISO/DIS 4623-2 – Paints and varnishes — Filiform corrosion — Part 2: Aluminium substrates

ISO 4746:1977 – Oxygen-free copper — Scale adhesion test

ISO 4952:1981 – Structural steels with improved atmospheric corrosion resistance

ISO/DIS 4952 – Structural steels with improved atmospheric corrosion resistance (Revision of ISO 4952:1981)

ISO/DIS 5256 – Steel pipes and fittings for onshore and offshore pipelines — External coating by bitumen or coal-tar derived material

ISO 5832-1:1997 – Implants for surgery — Metallic materials — Part 1: Wrought stainless steel

ISO 5952:1998 – Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance

ISO 6118:1980 – Road vehicles — Elastomeric cups and seals for hydraulic brake actuating cylinders using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)

ISO 6119:1980 – Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

ISO 6251:1996 – Liquefied petroleum gases — Corrosiveness to copper — Copper strip test

ISO 6315:1980 – Road vehicles — Brake linings — Seizure to ferrous mating surface due to corrosion — Test procedure

ISO 6509:1981 – Corrosion of metals and alloys — Determination of dezincification resistance of brass

ISO 6743-8:1987 – Lubricants, industrial oils and related products (class L) — Classification — Part 8: Family R (Temporary protection against corrosion)

ISO 6856:1990 – Road vehicles — Unscreened high-tension ignition cable assemblies — General requirements and test methods

ISO 6957:1988 – Copper alloys — Ammonia test for stress corrosion resistance

ISO 6988:1985 – Metallic and other non organic coatings — Sulfur dioxide test with general condensation of moisture

ISO 7120:1987 – Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water

ISO 7384:1986 – Corrosion tests in artificial atmosphere — General requirements

ISO 7441:1984 – Corrosion of metals and alloys — Determination of bimetallic corrosion in outdoor exposure corrosion tests

ISO 7539-1:1987 – Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures

ISO 7539-2:1989 – Corrosion of metals and alloys — Stress corrosion testing — Part 2: Preparation and use of bent-beam specimens

ISO 7539-3:1989 – Corrosion of metals and alloys — Stress corrosion testing — Part 3: Preparation and use of U-bend specimens

ISO 7539-4:1989 – Corrosion of metals and alloys — Stress corrosion testing — Part 4: Preparation and use of uniaxially loaded tension specimens

ISO 7539-5:1989 – Corrosion of metals and alloys — Stress corrosion testing — Part 5: Preparation and use of C-ring specimens

ISO 7539-6:1989 – Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens

ISO 7539-7:1989 – Corrosion of metals and alloys — Stress corrosion testing — Part 7: Slow strain rate testing

ISO/DIS 7539-8 – Corrosion of metals and alloys — Stress corrosion testing — Part 8: Preparation and use of specimens to evaluate weldments

ISO 8044:1989 – Corrosion of metals and alloys — Vocabulary

ISO/DIS 8044 – Corrosion of metals and alloys — Basic terms and definitions

ISO 8168:1988 – Aerospace — Corrosion- and heat-resisting steel bolts with strength classification 1 100 MPa and MJ threads – Procurement specification

ISO 8179-1:1995 – Ductile iron pipes — External zinc coating — Part 1: Metallic zinc with finishing layer

ISO 8179-2:1995 – Ductile iron pipes — External zinc coating — Part 2: Zinc rich paint with finishing layer

ISO 8180:1985 – Ductile iron pipes — Polyethylene sleeving

ISO/DIS 8324 – Steel pipes and fittings for onshore and offshore pipelines — Internal lining with cement mortar

ISO 8403:1991 – Metallic coatings — Coatings anodic to the substrate — Rating of test specimens subjected to corrosion tests

ISO 8407:1991 – Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens

ISO/TR 8502-1:1991 – Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 1: Field test for soluble iron corrosion products

ISO 8565:1992 – Metals and alloys — Atmospheric corrosion testing — General requirements for field tests

ISO 8993:1989 – Anodized aluminum and aluminum alloys — Rating system for the evaluation of pitting corrosion — Chart method

ISO 8994:1989 – Anodized aluminum and aluminum alloys — Rating system for the evaluation of pitting corrosion — Grid method

ISO 9022-12:1994 – Optics and optical instruments — Environmental test methods — Part 12: Contamination

ISO 9022-17:1994 – Optics and optical instruments — Environmental test methods — Part 17: Combined contamination, solar radiation

ISO/DIS 9216 – Aerospace — Nuts, hexagonal, slotted (castellated), for pulleys, in cadmium plated alloy steel and corrosion resisting steel — Dimensions and masses

ISO/DIS 9217 – Aerospace — Washers, chamfered, with counterbore, for pulleys, in alloy steel and corrosion resisting steel — Dimensions and masses

ISO/DIS 9218 – Aerospace — Washers, flat, for pulleys, in alloy steel and corrosion resisting steel — Dimensions and masses

ISO 9223:1992 – Corrosion of metals and alloys — Corrosivity of atmospheres — Classification

ISO 9224:1992 – Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories

ISO 9225:1992 – Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of pollution

ISO 9226:1992 – Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity

ISO 9227:1990 – Corrosion tests in artificial atmospheres — Salt spray tests

ISO 9400:1990 – Nickel-based alloys — Determination of resistance to intergranular corrosion

ISO 9455-12:1992 – Soft soldering fluxes — Test methods — Part 12: Steel tube corrosion test

ISO 9455-15:1996 – Soft soldering fluxes — Test methods — Part 15: Copper corrosion test

ISO 9591:1992 – Corrosion of aluminum alloys — Determination of resistance to stress corrosion cracking

ISO/DIS 9736 – Aerospace — Eye-ends, in corrosion resisting steel, threaded, for aircraft control wire rope — Dimensions and loads

ISO/DIS 9737 – Aerospace — Eye-ends , in corrosion resisting steel, swaged on aircraft control wire rope — Dimensions and loads

ISO/DIS 9747 – Aerospace — Double-shank ball-ends, in corrosion resisting steel, swaged on aircraft control wire rope — Dimensions and loads

ISO/DIS 9748 – Aerospace — Ball-ends, in corrosion resisting steel, swaged on type, for aircraft control wire rope — Dimensions and loads

ISO/DIS 9749 – Aerospace — Stud-ends in corrosion resisting steel, swaged on aircraft control wire rope — Dimensions and loads

ISO/DIS 9757 – Aerospace — Fork-ends, in corrosion resisting steel, for aircraft control wire rope turnbarrels — Dimensions and loads

ISO/DIS 9758 – Aerospace — Fork-ends, in corrosion resisting steel, threaded, for rolling bearings, for aircraft control wire rope — Dimensions and loads

ISO/DIS 9759 – Aerospace — Fork-ends, in corrosion resisting steel, swaged on type, for aircraft control wire rope — Dimensions and loads

ISO/DIS 9760 – Aerospace — Fork-ends, in corrosion resisting steel, swaged on type, for rolling bearings, for aircraft control wire rope – Dimensions and loads

ISO/DIS 9761 – Aerospace — Locking clips, in corrosion resisting steel, for aircraft control wire rope turnbuckles — Dimensions

ISO 10062:1991 – Corrosion tests in artificial atmosphere at very low concentrations of polluting gas (es)

ISO/TR 10129:1993 – Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions

ISO/TR 10217:1989 – Solar energy — Water heating systems — Guide to material selection with regard to internal corrosion

ISO 10270:1995 – Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors

ISO/TR 10271:1993 – Dentistry — Determination of tarnish and corrosion of metals and alloys

ISO/FDIS 10289 – Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates — Rating of test specimens and manufactured articles subjected to corrosion tests

ISO 10446:1990 – Welding — All-weld metal test assembly for the classification of corrosion-resisting chromium and chromium-nickel steel covered arc welding electrodes

ISO/DIS 10683 – Fasteners — Non-electrolytically applied zinc flake coatings

ISO 10792-1:1995 – Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 1: Metric series

ISO 10792-2:1995 – Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 2: Inch series

ISO 10792-3:1995 – Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 3: Technical specification

ISO/DIS 11130 – Corrosion of metals and alloys — Alternate immersion test in salt solutions

ISO 11306:1998 – Corrosion of metals and alloys — Guidelines for exposing and evaluating metals and alloys in surface sea water

ISO 11463:1995 – Corrosion of metals and alloys — Evaluation of pitting corrosion

ISO 11474:1998 – Corrosion of metals and alloys — Corrosion tests in artificial atmosphere — Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)

ISO 11659-1:1995 – Textile machinery and accessories — Machine parts in contact with textile processing oils — Part 1: Determination of anticorrosive effect upon steel

ISO 11782-1:1998 – Corrosion of metals and alloys — Corrosion fatigue testing — Part 1: Cycles to failure testing

ISO 11782-2:1998 – Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens

ISO/TR 11842:1997 – Road vehicles — Comparison of statutory photometric requirements in various countries for lighting devices

ISO 11845:1995 – Corrosion of metals and alloys — General principles for corrosion testing

ISO 11846:1995 – Corrosion of metals and alloys — Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys

ISO/DIS 11881 – Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys

ISO 11972:1998 – Corrosion-resistant cast steels for general applications

ISO 11997-1:1998 – Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity

ISO/DIS 11997-2 – Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/light (UV)

ISO/DIS 12281 – Aerospace — Rivets, solid, 100 degrees normal countersunk head, metallic material, with or without surface treatment — Dimensions

ISO/DIS 12731 – Corrosion of metals and alloys — Susceptibility to caustic intergranular corrosion and stress corrosion cracking of alloys used in nuclear steam generator tubing

ISO/DTR 12928 – Lubricants, industrial oils and related products (class L) — Family R (Temporary protection against corrosion) – Guidelines for establishing secifications

ISO 12944-1:1998 – Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction

ISO 12944-2:1998 – Paints and vernishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments

ISO 12944-3:1998 – Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations

ISO 12944-4:1998 – Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation

ISO 12944-5:1998 – Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint systems

ISO 12944-6:1998 – Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods

ISO 12944-7:1998 – Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work

ISO 12944-8:1998 – Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance

ISO 13402:1995 – Surgical and dental hand instruments — Determination of resistance against autoclaving, corrosion and thermal exposure

ISO/DIS 13628-1 – Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations

ISO/DIS 13628-4 – Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment

ISO/DIS 13680 – Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions

ISO/DIS 13805 – Vitreous and porcelain enamels for aluminium — Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)

ISO/DIS 13806 – Vitreous and porcelain enamels — Corrosion tests in closed systems

ISO/DIS 14713 – Protection against corrosion of iron and steel in structures — Zinc and aluminium coatings – Guidelines

ISO/DIS 14802 – Corrosion of metals and alloys — Guidelines for applying statistics to analysis of corrosion data

ISO/DIS 14993 – Corrosion of metals and alloys — Accelarated corrosion testing involving cyclic exposure to salt mist, dry and wet conditions

ISO/DIS 15324 – Corrosion of metals and alloys — Evaluation of stress corrosion cracking by the drop evaporation test

ISO/DIS 15710 – Paints and varnishes — Corrosion testing — Determination of resistance to alternate immersion in and removal from sodium chloride solution