NACE Standards

RP0169 – Control of External Corrosion on Underground or Submerged Metallic Piping Systems

RP0170 – Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking during Shutdown of Refinery Equipment

RP0472 – Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments

RP0572 – Design, Installation, Operation, and Maintenance of Impressed Current Deep Groundbeds

RP0273 – Handling and Proper Usage of Inhibited Oilfield Acids

RP0274 – High-Voltage Electrical Inspection of Pipeline Coatings Prior to Installation

RP0375 – Wax Coating Systems for Underground Piping Systems

RP0475 – Selection of Metallic Materials to Be Used in All Phases of Water Handling for Injection into Oil-Bearing Formations

RP0575 – Internal Cathodic Protection Systems in Oil-Treating Vessels

RP0775 – Preparation and Installation of Corrosion Coupons and Interpretation of Test Data in Oilfield Operations

RP0176 – Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production

RP0376 – Monolithic Organic Corrosion-Resistant Floor Surfaces

RP0177 – Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems

RP0178 – Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanksand Vessels to Be Lined for Immersion Service

RP0180 – Cathodic Protection of Pulp and Paper Mill Effluent Clarifiers

RP0181 – Liquid-Applied Internal Protective Coatings for Oilfield Production Equipment

RP0281 – Method for Conducting Coating (Paint) Panel Evaluation Testing in Atmospheric Exposures

RP0182 – Initial Conditioning of Cooling Water Equipment

RP0184 – Repair of Lining Systems

RP0185 – Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe

RP0285 – Corrosion Control of Underground Storage Tank Systems by Cathodic Protection

RP0186 – Application of Cathodic Protection for External Surfaces of Steel Well Casings

RP0286 – Electrical Isolation of Cathodically Protected Pipelines

RP0386 – Application of a Coating System to Interior Surfaces of Covered Steel Hopper Rail Cars in Plastic, Food, and Chemical Service

RP0187 – Design Considerations for Corrosion Control of Reinforcing Steel in Concrete

RP0287 – Field Measurement of Surface Profile of Abrasive Blast Cleaned Steel Surfaces Using a Replica Tape

RP0387 – Metallurgical and Inspection Requirements for Cast Sacrificial Anodes for Offshore Applications

RP0487 – Considerations in the Selection and Evaluation of Interim Petroleum-Based Coatings

RP0188 – Discontinuity (Holiday) Testing of Protective Coatings

RP0288 – Inspection of Linings on Steel and Concrete

RP0388 – Impressed Current Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks

RP0189 – On-Line Monitoring of Cooling Waters

RP0190 – External Protective Coatings for Joints, Fittings, and Valves on Metallic Underground or Submerged Pipelines and Piping Systems

RP0290 – Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures

RP0390 – Maintenance and Rehabilitation Considerations for Corrosion Control of Existing Steel Reinforced Concrete Structures

RP0490 – Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 mm (10 to 30 mils)

RP0590 – Recommended Practice for Prevention, Detection, and Correction of Deaerator Cracking

RP0690 – Standard Format for Collection and Compilation of Data for Computerized Material Corrosion Resistance Database Input

RP0191 – The Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories

RP0291 – Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories

RP0391 – Materials for the Handling and Storage of Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures

RP0491 – Worksheet for the Selection of Oilfield Nonmetallic Seal Systems

RP0591 – Coatings for Concrete Surfaces in Non-Immersion and Atmospheric Services

RP0192 – Monitoring Corrosion in Oil and Gas Production with Iron Counts

RP0292 – Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment

RP0392 – Recovery and Repassivation after Low pH Excursions in Open Recirculating Cooling Water Systems

RP0492 – Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes-

RP0592 – Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service

RP0692 – Application of a Coating System to Exterior Surfaces of Steel Rail Cars

RP0792 – Standard Format for Computerized Close Interval Survey Data

RP0892 – Linings over Concrete for Immersion Service

RP0193 – External Cathodic Protection of On-Grade Metallic Storage Tank Bottoms

RP0194 – Criteria and Test Methods for Cathodic Protection of Lead Sheath Cable

RP0294 – Design, Fabrication, and Inspection of Tanks for the Storage of Concentrated Sulfuric Acid and Oleum at Ambient Temperatures

RP0394 – Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating

RP0195 – Recommended Practice for Corrosion Control of Sucker Rods by Chemical Treatment

RP0295 – Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars

RP0395 – Epoxy-Coated Steel Reinforcing Bars

RP0495 – Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industries

RP01 96 – Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks

RP0296 – Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H25 Environments

RP0197 – Standard Format for Computerized Electrochemical Polarization Curve Data Files

RP0297 – Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators

RP0497 – Field Corrosion Evaluation Using Metallic Test Specimens

RP0198 – The Control of Corrosion Under Thermal Insulation and Fireproofing Materials – A Systems Approach

TM0169 – Laboratory Corrosion Testing of Metals (similar to ASTM G31)

TM0171 – Autoclave Corrosion Testing of Metals in High-Temperature Water

TM0172 – Determining Corrosive Properties of Cargoes in Petroleum Product Pipelines

TM0173 – Methods for Determining Quality of Subsurface Injection Water Using Membrane Filters

TM0174 – Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials in Immersion Service

TM0274 – Dynamic Corrosion Testing of Metals in High-Temperature Water

TM0374 – Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems)

TM0275 – Performance Testing of Steel and Reinforced Plastic Sucker Rods by the Mixed-String, Alternate-Rod Method

TM0177 – Laboratory Testing of Metals for Resistance to Specific Forms of Environmental Cracking in H2S Environments

TM0183 – Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment

TM0184 – Accelerated Test Procedures for Screening Atmospheric Surface Coating Systems for Offshore Platforms and Equipment

TM0284 – Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking

TM0384 – Holiday Detection of Internal Tubular Coatings of Less Than 250 ?m (10 mils) Dry Film Thickness

TM0185 – Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave Testing

TM0186 – Holiday Detection of Internal Tubular Coatings of 250 to 760 ?m (10 to 30 mils) Dry Film Thickness

TM0286 – Cooling Water Test Unit Incorporating Heat Transfer Surfaces

TM0187 – Evaluating Elastomeric Materials in Sour Gas Environments-

TM0190 – Impressed Current Test Method for Laboratory Testing of Aluminum Anodes

TM0192 – Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments

TM0193 – Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures below 930C (2000F)

TM0194 – Field Monitoring of Bacterial Growth in Oilfield Systems

TM0294 – Testing of Embeddable Anodes for Use in Cathodic Protection of Atmospherically Exposed Steel-Reinforced Concrete

TMO196 – Chemical Resistance of Polymeric Materials by Periodic Evaluation

TM0296 – Evaluating Elastomeric Materials in Sour Liquid Environments

TM0197 – Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate and/or Strontium Sulfate from Solution (for Oil and Gas Production Systems)

TM0297 – Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials

TM0397 – Screening Tests for Evaluating the Effectiveness of Gypsum Scale Removers

TM0497 – Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems

TM0198 – Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service

MR0174 – Recommendations for Selecting Inhibitors for Use as Sucker-Rod Thread Lubricants

MR0274 – Material Requirements for Polyolefin Cold-Applied Tapes for Underground Submerged Pipeline Coatings

MR0175 – Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment

MR0176 – Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments

NACE No. 1/SSPC-SP5 (RP0494) – White metal Blast Cleaning (blast cleaning abrasive to achieve a defined degree of cleaning of steel surface prior to the application of a protective coating or lining system)

NACE No. 2/SSPC-SP10 (RP0594) – Near-White metal Blast Cleaning (blast cleaning abrasive to achieve a defined degree of cleaning of steel surface prior to the application of a protective coating or lining system)

NACE No. 3/SSPC-SP6 (RP0694) – Commercial Blast Cleaning (blast cleaning abrasive to achieve a defined degree of cleaning of steel surface prior to the application of a protective coating or lining system)

NACE No. 4/SSPC-SP7 (RP0794) – Brush-Off Blast Cleaning (blast cleaning abrasive to achieve a defined degree of cleaning of steel surface prior to the application of a protective coating or lining system)

NACE No. 5/SSPC-SP12 (RP0595) – Surface Preparation and Cleaning of Steel and other Hard Materials by High and Ultrahigh-Pressure Water Jetting Prior to Recoating (replaces NACE RP0172)

NACE No. 6ISSPC-SP13 (RP0397) – Surface Preparation of Concrete (preparation of concrete surfaces prior to the application of protective coating or lining systems)

NACE EG2 – Protective Coatings for Carbon Steel and Austenitic Stainless Steel Surfaces Under Thermal Insulation and Cementitious Fireproofing (corrosion under insulation).